| Customization: | Available |
|---|---|
| After-sales Service: | Provided |
| Warranty: | Provided |
|
Still deciding? Get samples of US$ 5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Your garage door is usually very heavy. The garage door springs allow you to conveniently raise and lower your garage door. At Bestar Door, you can purchase Torsion Springs for your Garage Door with high quality and good price, to reduce Garage Door Spring Repair Cost.
As professional Garage Door Spring Manufacturer and Garage Door Spring Supplier, each week we move Torsion Spring to customers in Chicago, Houston, Florida, New York, and Los Angeles. We offer a wide selection of torsion springs in 1.75" and 2" diameters in multiple wire sizes ranging from 0.207 to 0.272 and all our torsion springs are heat treatment, oil tempered or black coated and corrosion resistant.
Our Torsion Springs are available for most USA Garage Door Manufactures and Suppliers, including but limited to: CHI Garage Doors, Clopay Garage Doors, Amarr Garage Doors, Raynor Garage Doors, Midland Garage Doors and Wayne Dalton Garage Doors.
| Name | Garage Door Torsion Spring |
| Certification | ISO 9001 |
| Customization | Support |
| OEM | Support |
| Diameters | 1.75" and 2" |
| Wire sizes | 0.207, 0.218, 0.225, 0.234, 0.243, 0.250, 0.262, 0.272 |
| Surface Treatment | Oil Tempered, Powder Coated, Galvanized, etc |
| Package | Wood Board, Foam Board and Others or Packing as Customers needs |
| Application | Residential , Commercial and Industrial Garage Doors are Available |
As Garage Door Torsion Springs manufactuer, we offer Torsion Springs in 1.75" and 2" diameters in multiple wire sizes ranging from 0.207, 0.218, 0.225, 0.234, 0.243, 0.250, 0.262 to 0.272.
All Bestar Garage Door Torsion Springs are manufactured from high-tensile and oil-tempered spring wire, meeting ASTM A229 standard. Both the winding and stationary cones are professionally installed for safe operation.
As the door is opened and closed over time, the steel in the springs can start to weaken as the door gradually becomes too heavy for them, rendering them less effective. The springs will eventually break, leaving the door closed. Torsion springs can also be affected by rust and cold weather. The average garage door torsion springs will last somewhere between 5-7 years, and should last around 10,000 cycles. So, if you open and close your garage door 3-5 times a day for over 365 days in a year, you should get plenty of life out of your torsion springs.
Things to Know about Garage Door Torsion Springs:
(1) Torsion springs must be measured while unwound.
(2) To match your previous size exactly, you will need to measure the wire size, the inside diameter, and the total length.
(3) The wire size and inside diameter are critical, this is where most mistakes are made.
(4) The length doesn't have to be completely precise. Anything within a half inch will be fine.
(5) The direction of the wind on the spring is opposite the side that it goes on.
How To Measure Garage Door Springs?
To measure the torsion springs, follow each of the following four steps carefully. If the garage door has two springs measure each spring individually.
(1) Measure Torsion Spring Inside Diameter
(2) Measure Torsion Spring Wire Size
(3) Measure Torsion Spring Length
(4) Wind of Torsion Spring
How Do Garage Door Springs Work?
Torsion springs are normally mounted horizontally above the opening of your garage door. When you pull the door down, cables attached to the bottom corners actually force torsion springs to wind up, in turn energizing the system. When you open the door, torsion springs then unwind and their energy transfers to the door, helping it to lift up and making it easier to open.
How Long Do Garage Door Springs Last?
Most garage door spring systems are designed to last 10,000 cycles. A cycle is when the garage door goes up and then goes back down. If you use your garage door four times a day, this equates to 1460 cycles in a year. That being said a garage door spring would only last for nearly 7 years.
However, there are conditions that make your springs more likely to break earlier. You may need to replace your garage door springs more frequently if you meet one or more of these conditions:
(1) You use your garage door frequently throughout the day - heavy usage will speed up springs wear and tear.
(2) Cold or humid environments can decrease your springs life cycles - rust and corrosion will weaken the metal of the spring
(3) You have a heavier garage door. Heavy garage doors will place more pressure on your springs and cause them to wear out sooner.
How Much Does Garage Door Springs Repair Cost?
A broken garage door spring is the most common part that needs repair or replacement since it does the heavy lifting each time you use the door.
Garage door spring repair costs an average of $250 for both materials and labor with a typical range between $150 and $350 which includes replacing two springs. For multi-door garages or installs needing other components replaced, you might pay up to $500.
The door size, number of springs, number of doors, Geographic location, and labor rates will determine the garage door spring replacement cost. Fortunately, a qualified professional can replace broken garage door springs and handle the problem safely.
Can I Replace Garage Door Springs Myself?
It can be extremely dangerous to fix your garage door springs yourself. If you don't have the proper training and equipment for the job, you should always call a professional to do it. If you decide to do it on your own, you pose a risk for damage to yourself and your garage door.
We strongly recommend that only a trained garage door professional install garage door torsion springs. These springs need to be wound manually and can cause serious injury if the tension is released inadvertently.
){kind=link}